SHKH steel shell cross flow open cooling tower-Wuxi Deep Sea Heat Transfer Technology Co., Ltd.

Home page

PRODUCTS

SHKH steel shell cross flow open cooling tower

In the high temperature difference (HIGHRANGE), that is, the temperature difference between hot and cold water exceeds 18 degrees, because the hot water needs to reduce the temperature by more than 18 degrees in a short period of time, it is necessary to have sufficient time for contact with the air of the filler, so the filler must be done. high. (actually equivalent to secondary, tertiary cooling)

Category：

SHKH Square Cross Flow Open Cooling Tower

Hotline：

0510-82800815

Inquiry

Products

Product Description

Product Features

In the case of high temperature difference (HIGHRANGE), that is, if the temperature difference between hot and cold water exceeds 18 degrees, since the hot water needs to reduce the temperature by more than 18 degrees in a short period of time, it is necessary to have sufficient contact time with the filler air, so the filler should be Do it very high. (actually equivalent to secondary, tertiary cooling);

Because the wind and water of the cross-flow tower are cross-flow, the resistance is only related to the diameter and depth, not to the height, so theoretically it can be very high;

The packing of the countercurrent tower cannot be made very high, and the wind and water convection, generally above 1.5MI, may cause air resistance. For example, color coating and galvanizing cooling in steel mills, and cross-flow towers can be used in rubber factories where hot water needs to be reduced from 55 degrees to 35 degrees or lower;

The water tower made of SKS steel has a packing height of 5.5M and a cooling temperature difference of 25 degrees; it is the papermaking process of APP Jinguang Group, using a 4000T/H single-cell cross-flow tower with a packing height of 15M;

In the case of sewage, the cross-flow tower can use grid packing, and it can be easily cleaned at any time without downtime; although the counter-flow tower can use grid packing, there are problems in cleaning, and in practical projects, sewage is often accompanied by high temperature, Therefore, the cross-flow tower can be used in two ways.

Parameter list

Parameters Water volume m^₃/h Model	Standard	Dimensions			Air volume	Blade diameter	Motor power	Height into the tower	Open tower interface diameter				weight		Noise value
	Standard	Dimensions			Air volume	Blade diameter	Motor power	Height into the tower	In and out of water	Overflow	Sewage	Hydration	Self weight	Run heavy	Standard point
	37～32℃	Long (L)	width (W)	height (H)	m3/h	mm	KW	mH2O	DNmm	DNmm	DNmm	DNmm	KG	KG	KG
	28℃	mm	mm	mm	m3/h	mm	KW	mH2O	DNmm	DNmm	DNmm	DNmm	KG	KG	KG
SHKH-50	50	1500	3200	3200	33000	1200	1.5	3.8	100	50	40	20	670	1475	58
SHKH-65	65	1880	3200	3200	40000	1200	2.2	3.8	100	50	40	20	740	1685	58
SHKH-80	80	1880	3400	3200	56000	1500	3	3.8	125	65	40	20	880	2040	59
SHKH-100	100	2180	3400	3700	60000	1500	3	4.2	125	65	40	20	1150	2350	59
SHKH-125	125	2180	3800	3700	79000	1800	4	4.2	150	80	40	20	1250	2550	59
SHKH-150	150	2680	3800	3700	100000	1800	4	4.2	150	80	40	20	1350	2850	59
SHKH-175	175	2680	4200	3700	105000	2200	5.5	4.2	200	80	40	20	1520	3130	60
SHKH-200	200	2680	4200	4500	125000	2200	7.5	5.1	200	80	40	25	1620	3770	60
SHKH-225	225	3000	4200	4500	130000	2200	7.5	5.1	200	80	40	25	2080	4300	60
SHKH-250	250	3000	4500	4500	175000	2500	7.5	5.1	200	80	40	25	2200	4870	61
SHKH-300	300	3000	5000	4500	185000	2500	7.5	5.1	200	80	40	25	2550	5300	61
SHKH-350	350	3300	5500	4800	200000	2950	11	5.4	250	80	40	40	2850	6200	61
SHKH-400	400	3300	5500	5400	220000	2950	11	6	250	80	40	40	3250	6600	62
SHKH-450	450	3800	5550	5400	235000	2950	11	6	250	80	50	40	3550	7400	62
SHKH-500	500	3800	6000	5600	305000	3400	15	6	300	80	50	40	4050	8200	63
SHKH-600	600	4600	6000	5600	335000	3400	15	6.2	300	80	50	50	4650	9800	63
SHKH-7O0	700	4600	6200	6000	395000	3600	18.5	6.5	300	80	50	50	5050	10500	64
SHKH-800	800	5100	6200	6000	455000	3600	22	6.5	300	80	50	50	5450	115000	65

Note: The parameter changes caused by equipment modification will not be notified beforehand. The specific parameters are mainly based on our plan.